Interlaced 2x2 Spoil Board p2
Carbide Create
Description
I've designed my own take on a 2x2 supplemental spoil board. I needed more holes than in the Myers wasteboard and wanted to have a simple 4 piece design. Here is an interlaced 2x2 pattern with 4 quadrant design. It uses threaded screw-in inserts. You'll need to cut this 4 times for a complete spoil board for the XXL. I'm using these inserts: https://www.amazon.com/gp/product/B002KT43MU/
Notes & Instructions
For a full size XXL, you'll need to make this 4 times.
There are 5 mounting grooves allowing you to secure the spoil board to the bed of your machine.
There are 3 carving groups within the design file...
- first is for carving the insert holes. I use a down-cut bit for the first to carves, with an up-cut when going through the board.
- second is for carving the top of the spoil board and carve out the 5 mounting grooves.
- third only needs to be done to the front right quadrant and cuts out a spot for the bit-setter to sit in the correct place.
Later I'll add an additional file for lasering a grid onto the top of your spoil board after surfacing.
There are 5 mounting grooves allowing you to secure the spoil board to the bed of your machine.
There are 3 carving groups within the design file...
- first is for carving the insert holes. I use a down-cut bit for the first to carves, with an up-cut when going through the board.
- second is for carving the top of the spoil board and carve out the 5 mounting grooves.
- third only needs to be done to the front right quadrant and cuts out a spot for the bit-setter to sit in the correct place.
Later I'll add an additional file for lasering a grid onto the top of your spoil board after surfacing.
Links
Gallery
Project Stats
Downloads
2229
Download Files
Last updated: August 21, 2020